Additive for heat carrier (coolant) leak indication STATERM LEAK INDICATOR

Additive is designed to indicate leakage places of heat carrier, coolant or water in heating, cooling or water supply systems.

Additive contains special agents that helps to find leakage place. To detect leakage place it is necessary to add and carefully mix STATERM LEAK INDICATOR with liquid in system. After that lighten pipeline with UV (ultra violet) light and leakage place will typically glow under UV. Leakage place can be found even after partial drying of heat carrier, coolant or water.

After work is finished throughly rinse water supply system with water. 

As UV (ultra violet) light source you can use any UV flashlight or lamp. Timely elimination of leakage guaranties normal and uninterrupted work of heating, cooling, ventilation or water supply system.

STATERM LEAK INDICATOR gets mixed well with heat carriers based on ethylene glycol (MEG) and propylene glycol (MPG), isopropyl alcohol and water.

COMPOSITION:  monopropylene glycol, special additives, complexing agent, prepared water.

PROPERTIES:

  1. Helps to find heating, cooling and water supply system leak places much easier;
  2. Provides heat carrier with glowing ability under UV light;
  3. Not affect rubber parts of the system;
  4. Non-corrosive;
  5. Mixes well with heat carriers based on ethylene glycol (MEG), propylene glycol (MPG), isopropyl alcohol and water.


TERMS OF USE: The additive is added to the heating system and thoroughly mixed with the heat carrier or water. Mixing proportion: 1 litre of additive per 100 litres of heat carrier. If necessary concentration can be increased till 2 litres of additive per 100 litres of heat carrier.

STORAGE: Store in a tightly closed container at temperatures above 5°C, in a dry ventilated area.