Putty and fillers
Special heat resistant filler intended for preparing for painting surfaces that are affected by high temperature. Can be used on surfaces of ovens, ovens’ and bathhouses’’ plates, covers, chimneys, grill places and grills as well as other surfaces.
FEATURES:
- Product ready for use;
- During heating do not emit harmful substances;
- Resistance against high temperature fluctuations;
- Low probability of cracks;
- Great adhesion to the surface and long life time.
USAGE: Before applying putty the surface must be accurately purified from the dust, old paint and if necessary moistened with water. Friable and poorly structured surfaces are recommended to strengthen using temperature resistant primer. Not recommended for using on wood, plastic or metal surfaces. Temperature of the processed surface +5ºC to +20ºC. Possible a partial thickening of product, with mixing, will get a working consistency.
CONSUMPTION: Approximately 1l/1-3m², if the thickness of the layer is 0.5-1.5mm.
DRYING: Primary putty bond time 1-1.5 hours. Final solidification within 10-24 hours, depending on surface absorbing ability, environmental temperature and the thickness of the applied layer. After final solidification surface can be grinded, primed and painted. Processed surface can be exposed to high temperatures after 15-20 days.
STORAGE: In original package, at temperature above 0ºC stored approximately for – see the label. May not freeze. Mix well before use.