Epoxy resins
RESIN epoxy thick without HARDENER
Documents
Epoxy pouring manual
- Epoxy productsTransparent
- Yellowish
- For ceramics
- For wood
- For gluing
- For metal
- Thick resin - for gluing
The indicated price is valid ordering till 08.12.2024.
Thick, modified epoxy resin composition. Used as a component №1 in two-component (component №1 – resin composition, component №2 – hardener) system, that is intended for gluing of different materials – metal, glass, porcelain, wood, ceramics etc.). Can be used for repairing various mineral surfaces, including concrete and cement mixtures.
FEATURES:
- Transparent;
- Does not contain organic solvents;
- Does not contain phthalates;
- High mechanical resistance;
- Resistant to temperature and chemicals;
- Good adhesion.
USAGE: Treated surface should be clean, hard and a little rough. Surface moisture not more than 4%. Apply on concrete surfaces no earlier than 28 days after the concrete is laid. Components №1 and №2 should be carefully mixed correctly 1:0.07. The adhesive components must be pressed firmly to obtain maximum contact between the adhesive surfaces. The optimum thickness of the glue layer is 0.1mm. Tools and equipment should be cleaned with acetone-based diluent immediately after use.
DRYING TIME: Initial adhesion time from 30 to 60 minutes at room temperature. Complete hardening time is approximately 24 hours at room temperature.
STORING: In original package, in temperature from +5°С to +25°С. Storing time – see package.