lv | ru | en
Log in / Register
My profile
0 0.00

Epoxy resins

RESIN epoxy for deep casting with HARDENER

4 kg ar cietinātāju


  • Epoxy products
    For wood
    For metal
    Liquid resin - for casting
Price includes tax 21%.
The indicated price is valid ordering till 16.06.2024.

Very low viscosity, modified epoxy resin composition. It is used as a component №1 in a two-component system (component №1 - resin composition, component №2 - hardener) in a system designed for particularly deep casting 5-15 cm. It is used as a molding compound for tables, wood, decorations, molds and other handicrafts.


  • Transparent with UV protection against yellowing;
  • Good adhesion to various surfaces;
  • Reduced bubble formation;
  • No characteristic odor;
  • Short curing time;
  • Good flow - self-leveling;
  • Resistant to chemical reagents.

APPLICATION: The surfaces to be treated must be clean, hard and slightly rough. Surface moisture not more than 10% (wood 5%). Apply on concrete surfaces not earlier than 28 days after laying the concrete. Optimal application temperature + 25 ° C and air humidity 70%. Components №1 and №2 must be thoroughly mixed in the correct weight ratio 3: 1. Wash tools and equipment immediately after use with acetone-based solvent. Goggles, gloves and a respirator must be worn during work. Detailed instructions for use are available at
DRYING TIME: Application time at + 25 ° C approx. 40 minutes. Full cure time about 24 hours, depending on casting thickness and temperature.
STORAGE: In the original packaging, at a temperature of + 5 ° С to + 25 ° С. Shelf life is indicated on the package.


Optically clear liquid with low viscosity. Intended for use as a hardener with liquid deep cast epoxy resin STAFOR (component No.2).
Mixing proportions (by weight):

  1. Deep casting liquid resin STAFOR (component No.1): 3
  2. Hardener for deep casting resins: 1

USAGE: Mix both components thoroughly, preferably transfer the mixture to another container and mix again. The mixture can be used for at least 30 minutes. (at 25 ° C). Detailed instructions for use are available at
RESTRICTIONS ON USE: Recommended mixture and air temperature 25 ° С. Maximum mixture and air temperature 30 ° С.
TOOLS: All tools and equipment should be washed with acetone immediately after use.
SAFETY: Wash hands and skin with warm water and soap. Goggles, gloves and a respirator must be worn during work. 

Related products